Depth Spelunking Wiki

Depth Spelunking Controls: Confirmed Task Inputs

Confirmed Depth Spelunking task controls for PC, mobile, and console, plus puzzle instructions and the keybinds still unverified.

Depth Spelunking controls vary by task: the Calibrator uses dragging, while the Coordinator uses WASD on PC and dragging on mobile or console. The supplied references also confirm a mobile tap input for the Explosive Generator, but do not establish a complete set of movement, sprint, flashlight, inventory, or interaction bindings. The controls below come from the collected task records; the game version is not independently confirmed.

Confirmed controls by task

Use this table for the specific puzzle you are operating. WASD is documented here for the Coordinator’s pin, so that entry should not be treated as verification of general character movement.

TaskPCMobileConsole
CalibratorLeft-click and drag each slider.Tap and drag each slider.Use the cursor, hold A on Xbox or X on PlayStation, and drag each slider.
CoordinatorUse WASD to slide the red pin.Tap and drag the red pin.Select the pin with the cursor, hold A on Xbox or X on PlayStation, and drag it.
Explosive GeneratorNot confirmed in the supplied material.Tap the screen when the arrow reaches the red area.Not confirmed in the supplied material.

The console instructions describe cursor-based interaction with these tasks. They do not provide a full controller layout, and the available material does not establish every supported device or control configuration.

How to operate the Calibrator

The Calibrator asks you to position four sliders using both visual and audio feedback. There is no fixed set of slider positions supplied in the references; use the task’s indicators to find each correct position.

  1. Select a slider using the input for your device.
  2. Drag it while watching the light on the right.
  3. Look for the light to become brighter and whiter as you approach the correct position.
  4. Listen for the static sound to increase in volume.
  5. Repeat the adjustment for all four sliders.

The light and static are two cues for the same adjustment. If you are unsure where to leave a slider, compare both cues as you move it.

This task cannot be failed, according to the task record. You can also leave it unfinished and return to complete it later during the same floor. That makes its behavior different from the Coordinator, where an incorrect order resets progress, and the Explosive Generator, where failure causes damage.

How to operate the Coordinator

The Coordinator contains a 7×7 grid with letters A–G vertically and numbers 1–7 horizontally. Its red pin starts at D4, the center of the grid.

Three target coordinates appear at the top of the task screen. Your objective is to move the pin to those coordinates in order, beginning with the leftmost target.

  1. Read the leftmost coordinate before moving the pin.
  2. Use WASD on PC, or drag the pin on mobile or console.
  3. Move the pin to the first target.
  4. Continue to the second target, then the third.

The order matters as much as the destination. Moving the pin to a later target before its turn fails the task and resets your progress. However, the target coordinates remain the same after failure, so you can retry the displayed sequence without learning a replacement set.

A common mistake is to focus on a coordinate that is easy to reach while overlooking its position in the sequence. Read the targets from left to right before starting, especially when switching from a task such as the Calibrator that has no failure penalty.

Explosive Generator mobile input and failure penalty

The Explosive Generator is a black, more difficult variant of the Generator task. Its confirmed mobile control is a timing input: tap the screen when the arrow is inside the red area.

The supplied record does not confirm the corresponding PC key, mouse button, or console input. Do not assume that the mobile instruction establishes those bindings.

Failure triggers an explosion that deals 50 damage and ragdolls the Delver. It also applies Brain Damage, Broken Leg, Broken Ribs, Dislocated Shoulder, and Ruptured Eardrums. These consequences make identifying the correct input particularly useful before attempting this task.

Which general controls remain unconfirmed?

The available gameplay reference shows a player completing tasks, using a flashlight, and encountering threats. It does not reliably identify the buttons used for those actions.

The following bindings remain unconfirmed in the supplied material:

  • Character movement and camera controls.
  • Sprinting.
  • Flashlight activation or toggling.
  • Opening and closing task interfaces.
  • Selecting, using, or dropping items.
  • Chat and inventory access.

The Lobby contains tip boards and serves as the safe hub before delves. Its front doorway leads to the elevators used to begin a delve. The references do not establish that its boards contain a complete controls list, so they should not be cited as verification of missing keybinds.

Gameplay video reference

Gameplay video reference

Gameplay video reference — The Control Patrol

This community playthrough provides context for the task-and-exploration loop in Roblox Depth Spelunking. The creator works through puzzles and reads survival advice, but also expresses uncertainty about several mechanics. Use it as a gameplay reference; the specific task inputs above are supported by the supplied knowledge-base records, rather than an official controls manual.